Underground Mining Equipment Operator Resume Template
A finished one-page underground mining equipment operator resume with the duties, tools and credentials employers look for. Download it as Word or PDF, print it, or change every line in the builder.
- Run a Joy 7LS shearer by radio remote on a 1,200-foot longwall face, cutting 9,000 tons a shift.
- Adjust cutting horizon to seam height and keep the face straight with shield and AFC crews.
- Monitor methane, water sprays and drum pick condition and change picks at planned stops.
- Helped raise panel production 7% by cutting unplanned shearer downtime from 14% to 8%.
- Train 2 new shearer operators and lead the shift crew on lockout and face-entry procedures.
- Advanced hydraulic roof shields behind the shearer and pushed the armored face conveyor on each pass.
- Checked shield leg pressures and hoses and reported faults to the longwall mechanic.
- Moved stageloader and crusher during panel advances and helped with longwall face moves.
- Hung ventilation curtains and set cribs along tailgate entries per the ventilation plan.
- Completed Part 48 new miner training and supported a development section as a general laborer.
- Rock-dusted entries, shoveled belt lines and hauled supplies with a battery scoop.
Names, employers and dates on the sample are invented. Duties and software come from O*NET 31.0; credentials were checked against the sources listed below.
Licenses and certifications
- MSHA Part 48 Underground Miner Certification Mine operator / MSHA-approved instructor Required in most states
Sources: www.bls.gov, www.msha.gov
Licensing rules differ by state; check with your state board before you apply.
Skills to list
- Underground Equipment Operation
- Ground Control Awareness
- Methane Gas Monitoring
- Conveyor Systems
- Equipment Maintenance
- Ventilation Awareness
- Mine Safety Procedures
- Blast Area Coordination
Software and tools
- Microsoft Excel
- Microsoft Office software
- Microsoft Outlook
- Microsoft Word
- Maintenance management software
- Microsoft Windows
- Fleet monitoring system software
- Hitachi ZXLink
- Leica Geosystems FMS
- Caterpillar Cat MineStar System
Duties to describe on a underground mining equipment operator resume
- Hung ventilation tubing and ventilation curtains to ensure that the mining face area is kept properly ventilated.
- Drilled bolt holes into roofs at specified distances from ribs or adjacent bolts.
- Handled high voltage sources and hung electrical cables.
- Conducted methane gas checks to ensure breathing quality of air.
- Pulled down loose rock that cannot be supported.
- Drove loaded shuttle cars to ramps and moved controls to discharge loads into mine cars or onto conveyors.
Titles along the way
- Mining Equipment Trainee
- Underground Mining Machine Operator
- Lead Mining Equipment Operator
Your salary range
Pick where you work and how long you have done it. The range comes from the published wage percentiles for this job.
The survey has no complete figures for that job — pick the closest title from the list.
An estimate from survey percentiles, not an offer. Employer, industry, shift and credentials move pay within and beyond this range. Full wage page for this job →